Applications
Clean Air, Moderate Space Ventilation Applications:
- Commercial Kitchens
- Stock Rooms
- Meeting Rooms
- Equipment Rooms.
Capabilities
- AIRFLOW: Clean Air from 1,420 CFM to 4,050 CFM, up to 0.375" SP.
- SIZE FORMAT: Panel Mount.
- PROPELLER: Axial Propeller, Aluminum Blades. Diameters 16" to 20".
- DRIVE: Direct Drive. High Efficiency, TEAO, 120 to 480VAC Single or Three Phase, NEMA Frame Size Motors. Single or Dual Speed.
- TEMPERATURES: 40°C / 104°F
- INLET: Square Mounting Panel 24" H x 24" W to 28" H x 28" W.
- OUTLET: Circular Through-Panel Outlet.
- CONSTRUCTION: Steel Sheet, Gray Powder-Coated Finish. Indoor, Heavy-Duty.
- APPROVALS: ISO-9001 Certified Shop. AMCA Accredited In-House Test Laboratory.
Available Models
MODEL |
PROP DIAMETER [in] |
MAX CFM |
MAX SP [in WG] |
MAX BHP |
PANEL LENGTH [in] |
PANEL WIDTH [in] |
RPM |
SHAFT DIAMETER [in] |
PVM-16 |
16 |
1950 |
1⁄4 |
0.125 |
24 |
24 |
850 |
1⁄2 |
PVM-18 |
18 |
2800 |
1⁄4 |
0.166 |
26 |
26 |
850 |
1⁄2 |
PVM-20 |
20 |
4050 |
3⁄8 |
0.37 |
28 |
28 |
850 |
5⁄8 |
Construction
Single or dual-speed fractional horsepower motors, rigid steel mounting panels, and integral safety guards are just a few key features of Peerless' Propeller Fan PVM series.
Propeller
Our panel-mount fans include an aluminum blade assembly, dynamically balanced for efficient airflow at quiet volumes.
- High-Grade Aluminum Blades.
- Carbon Steel Hubs.
- Low Weight, High Efficiency Design.
Mounting Panel
Square, rigid steel mounting panels allow for either framed-in or surface mounting on walls or ceilings. Fan can be mounted in either a horizontal or vertical orientation.
- Single-Piece Panel.
- Four Pre-Drilled Mounting Holes.
- Powder-Coated Finish.
- Horizontal or Vertical Orientation.
Motor
All models include a totally enclosed, electric motor with permanently lubricated sealed ball bearings.
- Fractional Horsepower Motors.
- Long Service Hour Duty.
- Permanently Lubricated Ball Bearings.
Fan Guard
With safety in mind, these panel fans include an integral motor-fan guard constructed of heavy-duty corrosion-resistant solid round bar.
- Finger- and Animal-Safe.
- Removable for Easy Fan Access.
- Corrosion-Resistant Bar.
Arrangements
Peerless' Propeller Fan PVM series is available in a Panel Mount format.
Panel Mount
Panel Mounting uses a flat sheet metal base as the frame for the fan's components. This square panel includes four pre-drilled bolt holes, and is mounted by fastening to a flat wall, ceiling, or roof surface (check each model for acceptable orientations). The fan can be framed into an opening, surface-mounted, or mounted to a curb.
- Direct Drive.
- Permanently Lubricated Sealed Ball Bearings.
- Four 3/8" Mounting Holes.
Options
With several pre-packaged design options described below, Peerless' Propeller Fan PVM series can be customized to meet your unique application.
Discharge Shutters
To protect against weather and back-draft entry into the building through the fan housing, Discharge Shutters can be provided to mount onto the exterior building surface.
- Hold Out Weather.
- Corrosion-Resistant Construction.
- Manual or Automatic Operation.
Discharge Guard
For applications where the discharge end of the fan is exposed to personnel, a heavy-duty expanded metal safety guard can be provided to restrict incidental access to the fan blades.
- Heavy-Duty Expanded Metal Guard.
- Improves Safety and Reliability.
- Fully Encloses the Fan Blades.
Reverse Flow
Allowing the fan to serve as a make-up fan instead of an exhaust fan, a special reverse-flow blade and motor set can be configured for pulling air into the space.
- Exhaust or Make-Up Airflow Options.
- No Loss in Performance.
- No Special Wiring or Controls Needed.
Motors
Peerless can provide nearly any special motor specification, including multi-speed windings, stainless steel casings, washdown and other environmental ratings, inverter duty, explosion proof, IEC and other frame sizes, and more.
- Any Compatible Motor Can Be Provided.
- Domestic or International Frames.
- Special Environment Ratings.