Axial Propeller Fan, Direct Drive, Heavy Duty

Propeller Fan PVH

Heavy-duty, single or dual speed axial propeller fan, equipped with permanently lubricated bearings, integral fan guard, and balanced aluminum blades. For clean air ventilation.

High Volume Ventilation
Optional Variable Speed Controller
3 Models, 2,400 to 6,200 CFM, max 0.75" SP
Heavy-Duty Mounting Panel
Download Catalog

Propeller Fan PVH

Capability

Common Applications

Clean Air, Large Space Ventilation Applications: Commercial Kitchens, Laundries, Large Assembly Rooms, Equipment Rooms, Farm Buildings.

Airflow

Clean Air from 2,400 CFM to 6,200 CFM, up to 0.75" SP.

Size Format

Panel Mount.

Propeller

Axial Propeller, Aluminum Blades. Diameters 16" to 20".

Drive

Direct Drive. High Efficiency, TEAO, 120 to 480VAC Single or Three Phase, NEMA Frame Size Motors. Single or Dual Speed.

Temperatures

40°C / 104°F Max.

Inlet

Square Mounting Panel 24" H x 24" W to 28" H x 28" W.

Outlet

Circular Through-Panel Outlet.

Construction

Steel Sheet, Gray Powder-Coated Finish. Indoor / Outdoor, Heavy-Duty.

Spark Resistance

Not available for this series.

Approvals

ISO-9001 Certified Shop. AMCA Accredited In-House Test Laboratory.

Propeller Fan PVH

Available Models

Model

PVH-16

PVH-18

PVH-20

Prop Diameter

16

18

20

Max CFM

2975

4250

6200

Max SP

1⁄2

3⁄4

3⁄4

Max BHP

0.37

0.62

1.15

Panel Length

24

26

28

Panel Width

24

26

28

RPM

1750

1750

1750

Shaft Diameter

1⁄2

5⁄8

5⁄8

Fan Selection Tool

Our online fan selection tool will help you identify a suitable model for your application's requirements.

Propeller Fan PVH

Construction

Peerless' Propeller Fan PVH series provides single or dual-speed fractional horsepower motors, rigid steel mounting panels, and integral safety guards for heavy commercial applications.

Propeller

Our panel-mount fans include an aluminum blade assembly, dynamically balanced for efficient airflow at quiet volumes.

High-Grade Aluminum Blades.
Carbon Steel Hubs.
Low Weight, High Efficiency Design.

Mounting Panel

Square, rigid steel mounting panels allow for either framed-in or surface mounting on walls or ceilings. Fan can be mounted in either a horizontal or vertical orientation.

Single-Piece Panel.
Four Pre-Drilled Mounting Holes.
Powder-Coated Finish.
Horizontal or Vertical Orientation.

Motor

All models include a totally enclosed air-over (TEAO) motor with pre-lubricated, sealed ball bearings that allows installation in any position.

Fractional Horsepower Motors.
Long Service Hour Duty.
Terminal Wiring Box Onboard.

Fan Guard

With safety in mind, these panel fans include an integral motor-fan guard constructed of heavy-duty corrosion-resistant solid round bar.

Finger- and Animal-Safe.
Removable for Easy Fan Access.
Corrosion-Resistant Bar.

Propeller Fan PVH

Arrangements

Peerless’ Propeller Fan PVH series is available in a Panel Mount format.

Panel Mount

Panel Mounting uses a flat sheet metal base as the frame for the fan's components. This square panel includes four pre-drilled bolt holes, and is mounted by fastening to a flat wall, ceiling, or roof surface (check each model for acceptable orientations). The fan can be framed into an opening, surface-mounted, or mounted to a curb.

Direct Drive.
Pre-lubricated Sealed Ball Bearings.
Four 3⁄8" Mounting Holes.

Propeller Fan PVH

Options

Optional speed control, safety, and performance features allow Peerless' Propeller Fan PVH series to fit into any number of custom applications.

Speed Controller

The optional Variable Speed Controller adds a field-mounted dial for users to set desired anti-stall and / or minimum fan speeds.

User-Settable Speed Control.
Installs Near Fan for Easy Access.
Wires In-line with Supply Power.

Discharge Shutters

To protect against weather and back-draft entry into the building through the fan housing, Discharge Shutters can be provided to mount onto the exterior building surface.

Hold Out Weather.
Corrosion-Resistant Construction.
Manual or Automatic Operation.

Discharge Guard

For applications where the discharge end of the fan is exposed to personnel, a heavy-duty expanded metal safety guard can be provided to restrict incidental access to the fan blades.

Heavy-Duty Expanded Metal Guard.
Improves Safety and Reliability.
Fully Encloses the Fan Blades.

Reverse Flow

Allowing the fan to serve as a make-up fan instead of an exhaust fan, a special reverse-flow blade and motor set can be configured for pulling air into the space.

Exhaust or Make-Up Airflow Options.
No Loss in Performance.
No Special Wiring or Controls Needed.

Motors

Peerless can provide nearly any special motor specification, including multi-speed windings, stainless steel casings, washdown and other environmental ratings, inverter duty, explosion proof, IEC and other frame sizes, and more.

Any Compatible Motor Can Be Provided.
Domestic or International Frames.
Special Environment Ratings.

Stay In Touch!

Subscribe for Our Newsletter